G.E.T Lifting and Handling System


Industrial Magnetics Inc. GET Wear Plate Lifting System

The Safety MITS magnetic lift assist GET system is designed and built in the US specifically for the task of removing wear plates and cutting edges from bulldozers and graders used in mining, earth moving and construction operations. The system features two very powerful permanent magnets which are engaged/disengaged via pneumatic cylinders. The magnets are rated to lift up to a tonne in order to achieve a 300% safety factor for picking up the wear plates. The system also features a pneumatic tilt function which allows the user to match the angle of the blade or bucket on which the wear plate has to be installed/removed. Included in the package is a trolley for easy movement and storage of the system, 2 easy locate spigots to help locate the wear plate on the blade easily and a fully rated shackle or mounting point to use the system with an overhead crane. The magnet system can be mounted from a forklift or overhead crane to suit the area it is being used in. 


Floating Operation Handle

Crane control mount so the system can be operate jointly with an overhead crane

Corner piece magnet system to remove/reinstall the corner tip wear plates on various systems

Safety Features

  • 300% safety factor on lift capacity
  • Metal lip on the bottom of the system to stop the plates from slipping when the system is oriented at perpendicular to the ground
  • Magnets remain fully engaged if the system loses air pressure. Even if a pneumatic line bursts the magnets will continue to hold the wear plate
  • System is compliant with Australian Regulations
  • Comprehensive training packages available.