Stepped Rescue Chock BSCM4LO
Item Code: BSCM4LO- Always perform your own risk assessment before using this product.
OVERVIEW
Item Code: BSCM4LO
Product Description
The primary use of the step chocks are in vehicle stabilisation applications for rescue and small machinery maintenance.
Blox jacking and support blocks offer a safer and more reliable alternative to timber dunnage and blocks typically used for jacking and stabilising tasks. Manufactured from recycled plastic using a precise, repeatable formula under strict quality controls, these blocks ensure consistency and durability. Their recycled composition not only enhances environmental sustainability but also supports eco-friendly practices without compromising performance.
Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL of the cribbing blocks or cribs. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained from the resource page of this web site, email info@safetymits.com or phone 02 9838 8887.
FEATURES
- Certified load rated capacity
- Working Load Limit (WLL)* 122kg/cm2
- Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
- Comprehensive Technical Data Sheets (TDS) available
- Recycled high density polyethylene (HDPE) construction for durability
- Lightweight
- Resistant to fuels, oils and most common chemicals
- Will not splinter or rot
- Non-conductive
- Sturdy lanyard for ease of handling
- 50 year warranty against splitting, rotting, absorption, termites and mould
* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the cribbing block.
SPECIFICATIONS
Sizing:
- Overall dimensions – 12.5cm x 25cm x 60cm with Lanyard Orange.
- Step area – 7cm x 12.5cm
- Step heights – 7cm / 11cm / 15cm / 19cm.
- Weight – 12kg
OVERVIEW
Item Code: BSCM4LO
Product Description
The primary use of the step chocks are in vehicle stabilisation applications for rescue and small machinery maintenance.
Blox jacking and support blocks offer a safer and more reliable alternative to timber dunnage and blocks typically used for jacking and stabilising tasks. Manufactured from recycled plastic using a precise, repeatable formula under strict quality controls, these blocks ensure consistency and durability. Their recycled composition not only enhances environmental sustainability but also supports eco-friendly practices without compromising performance.
Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL of the cribbing blocks or cribs. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets can be obtained from the resource page of this web site, email info@safetymits.com or phone 02 9838 8887.
FEATURES
- Certified load rated capacity
- Working Load Limit (WLL)* 122kg/cm2
- Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
- Comprehensive Technical Data Sheets (TDS) available
- Recycled high density polyethylene (HDPE) construction for durability
- Lightweight
- Resistant to fuels, oils and most common chemicals
- Will not splinter or rot
- Non-conductive
- Sturdy lanyard for ease of handling
- 50 year warranty against splitting, rotting, absorption, termites and mould
* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the cribbing block.
SPECIFICATIONS
Sizing:
- Overall dimensions – 12.5cm x 25cm x 60cm with Lanyard Orange.
- Step area – 7cm x 12.5cm
- Step heights – 7cm / 11cm / 15cm / 19cm.
- Weight – 12kg
Related products
-
Storage Glut BB122560Read morePart No: BB122560- Non-Stackable Storage Glut 12cm x 25cm x 60cm.
- Working load limit (WLL) of 122kg/cm² at 25°C.
- Maximum load capacity of 183,000kg.
-
-
Profiled BP151860LO – StackableRead morePart No: BP151860LO- Interlocking Cribbing Block 15cm x 18cm x 60cm.
- Working load limit (WLL) of 122kg/cm² at 25°C.
- Maximum load capacity of 109,800kg.